Instruction Manual, HD6000/6000-ONE APPENDIX: Technical Specifications 5
REV B, Oct 7, 2013
BNCs are inputs they will only accept signals between 125 and 2970 MBPS. However when
the BNCs are outputs, they can function down to 19 MBPS. This is useful only if the channel
is receiving optical signals from devices other than the 6 PACK family.
The HDx000-ONE-FTX and FRX should be connected together by a SM optical fiber at the
COMMON ST/UPC connectors on their rear panels. This fiber will contain 6, 12 or 18 CWDM
signals representing the 6, 12 or 18 channels. As such, it cannot go thru an O/E/O switch.
The HDx000-FTX and FRX will require 6, 12 or 18 individual fibers to form a link. The default
configuration of the HDx000 is to use single mode fiber. Multimode fiber can be used with the
HDx000 only if it is ordered with MM optics. Unlike the HDx000-ONE, the HDx000’s fibers
each contain only one signal and thus only one wavelength so they can be routed thru a
switch. For the HDx000, connect each fiber I/O on the FTX to its matching I/O on the FRX.
The HD6000/6000-ONE comes standard as a stand-alone unit. An optional rack-mounting
kit is available to mount up to 3 units in a 1 Rack-unit or 1 ¾” by 19” rack space. The part
number is –RMT. Note that doing this does not convert the 2 or 3 HD6000-ONEs into a
HD12000-ONE or 18000-ONE. In order to place 12 or 18 wavelengths onto 1 fiber, you must
order the HD12000-ONE or 18000-ONE specifically. The HDx000/x000-ONE requires room
for adequate ventilation around it. Do not block the fan vent holes on the top of the case.
APPENDIX: Technical Specifications
General
Power: .............................................................................................. 9-24V / 12, 24 or 36VA
Impedance: ....................................................................................... 75 ohms
Return Loss, < 1.5 GHz: ................................................................... > 15 db
Return Loss, < 3.0 GHz: ................................................................... > 10 db
Max Cable Length, < 3.0 GHz: .......................................................... > 120 m
Added Jitter: ...................................................................................... < 0.06UI
Laser Safety ...................................................................................... Class 1
Optical Power .................................................................................... - 8 dbm to 0 dbm
Optical Sensitivity ............................................................................. -18 dbm
Operating Temperature .................................................................... 0 to 50 deg C
Data Rates, Optical I/O or BNC Out ................................................. 19 to 2970 MBPS
Data Rates, BNC Input: .................................................................... 125 to 2970 MBPS
Transmitter (-FTX)
Output Wavelengths ........................................................................ CWDM or 1310
Receiver (-FRX)
Input Wavelengths ............................................................................ CWDM or 1100 to 1600
Specifications are subject to change without notice.
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels